Induction heating by high frequency Induction heaters output current through the coil generates an alternating magnetic field, through the induction loop on the formation of eddy currents in the metal workpiece, so that the rapid heating, and induction loop itself does not produce heat, has been for decades history. The mid-1990s, solid-state IGBT module as the core began to induction heating equipment, and tube high-frequency induction heating equipment, devices and silicon compared to saving 10% -40%. Once available, on its energy-saving environmental protection, processing of high quality, easy operation, safe and reliable operation, maintenance costs, and many other advantages become the best field of small metal heating heating.
Different frequency induction heater, resulting in different heating effect, determines the heating quality is good or bad;-power size, determines the speed of the workpiece and the processing efficiency of the heating, so the workpiece according to heating requirements, select the correct frequency and power is very important.
First, how to choose the frequency
Induction heating equipment, according to the different output frequencies can be divided into: UHF, HF, VHF, MF and so on. Heating process required different needs at different frequencies, if you choose the wrong frequency can not meet the heating requirements, such as slow heating time, low efficiency, uneven heating, the temperature below standard, likely to cause damage to the workpiece.
Correct choice of frequency, first, to understand the product requirements of the heating process, probably said to have the following situations:
1, the workpiece through the heat, such as: fasteners, standard parts, auto parts, hardware tools, rigging, and other hot-rolled twist drill of hot forging, the workpiece diameter, the greater the frequency should be lower. Such as:
Φ4 mm below apply, UHF (100-500KHz)
Φ4-16, mm applies high frequency (50-100 KHz)
Φ16-40 mm applied over the audio (10-50 KHz)
Φ40 mm above the applicable MF(0.5-10 KHz)
2, heat treatment, shafts, gears, hardened and annealed stainless steel products and so on, to quench, for example, hardened layer of the workpiece requires more light, the frequency should be higher, deeper hardened layer, the frequency should be lower. Such as:
02.-0.8mm hardened layer is applied 100-250 KHz UHF, HF
1.0-1.5mm apply to 40-50 KHz high-frequency, ultrasonic,
1.5-2.0mm audio application 20-25 KHz ultra-
2.0-3.0mm ultra-apply 8-20 KHz audio, MF
3.0-5.0mm apply 4-8 KHz MF
5.0-8.0mm apply 2.5-4 KHz MF
3, brazing, soldering head, lathe, reamer, milling cutter, drill, etc., and stainless steel pot of different materials, hybrid welding, soldering the larger volume, more frequency should be reduced,
Welding, for example by turning tool, such as:
20 mm the following tools for 50-100 KHz frequency
20 – 30mm above the tool apply to 10-50 KHz high-frequency, ultrasonic,
30 mm above the tool, apply 1-8 KHz MF.
4, melting gold, silver, copper, lead and precious metals
According to the specific production efficiency furnace and determined. Optional high-frequency small-capacity, most of the election super audio, MF
Super audio applications to meet the casting industry in general, 200KG melting aluminum ingots per hour of general application.
Second, how to choose the power
When the workpiece according to your requirements, determine the frequency of the machine, the next step is to choose the appropriate production according to the power of the machine. The greater the power the machine, the faster the heating, but the price will increase, low-power devices, low cost, the heating is slow.
1, the ind |
